Contact:Jie Manager
Mobile: +86-18763530064
Mobile: +86-18888371288
E-mail:zxjm1288@163.com
Address:West of South Section Road, Lutou village, zhaozhaizi Town, Gaotang County, Liaocheng City, Shandong Province
There are many fixing methods for marble platform. Next, we will introduce the common fixing methods for marble platform
I. fixing method of locking screw
punch 1cm deep holes in the four corners of the table and add plastic bolts. Drill holes at the corresponding position of the support and fix it with locking screws from bottom to top. Add shockproof silicone pad or reinforcing ring. Remarks: holes can also be opened at the beam, and glue can also be added to increase strength: the overall load-bearing is strong, the appearance is simple and light, and the stability is good. It can protect the mobile desktop from shaking. Relevant technical pictures: schematic diagram of drilling and diagram of locking screw
II. Use the bottom mortise and tenon (embedded) installation method
mortise and tenon similar to carpentry. Marble should be thickened on four sides. For example, the surface area of table top and shelf is quite different, and materials filling and other processes are required. Generally, it is used for plastic. There are many wooden shelves. The toughness of the iron frame is poor and the hardness is too large. The table top may be unstable and damaged during the movement. Refer to the figure
III. bonding method
the support with four legs on the bottom is made wide. Increase the contact area and then use marble glue for bonding. Generally, glass countertops are widely used. If the marble surface needs to be treated at the bottom, and a layer of plate (wood material) needs to be bonded. The overall load-bearing performance is poor